This kit is designed to simplify adding a rack and pinion to you front axle. It is meant to work in conjunction with our rack and pinion mount kits. This is a complete kit that comes with stainless steel clevis adapters to go from a 1999-2006 2wd Chevy steering rack(Cardone PN: 22-1000) to a heavy duty 3/4" rod end(included). It comes with 4 chromoly rod ends(a left and right for both sides), a heavy duty bolt kit for both the knuckle side and the steering rack side, and 1.5" 7075 billet aluminum tie rods.
The 05+ Superduty Ford axles require a stainless steel bushing we designed to be pressed into the passenger side knuckle. The dual taper on the passenger knuckle has to be reamed out to exactly 1" for this to work. We recommend using a reamer for this as a drill bit will not be as exact of a hole which could cause the bushing to be loose. The driver side knuckle needs to be reamed to 3/4" but since no bushing is required this tolerance isn't as critical as the passenger side. We still recommend using a reamer for that hole as it will result in a more exact hole size.
This kit is designed to work with either a 1999-2006 2wd Chevy steering rack(Cardone PN: 22-1000)but is not included in the kit.
