In 4wd racing torque steer is extremely common. With our Dana 60 Rack and Pinion Mount this can be eliminated. While this is a labor intensive process, we have made it much easier by eliminating the guess work as to where the steering rack should be. This kit is designed to use either one of the common steering racks. Either a 1999-2006 2wd Chevy steering rack(Cardone PN: 22-1000) or a 2007-2013 2wd Dodge Ram steering rack(PN:SKP SK97387). Both racks are light weight, and very durable.
The Dodge rack is narrower, has a steeper angle(more upright), and is tipped slightly more forward which is easier to fit around factory motor mounts. If you are using a mid plate the more flat steering shaft angle of the Chevy rack may be more appealing.
This kit is designed to be welded to your axle. The long piece to the axle tube and the smaller piece to the differential cover. The welded end of both pieces is designed to be at the top. The threaded hole is 5/8"-11
We also make the frame side trac bar brackets if you need those. With a rack and pinion the trac bar doesn't need to be mounted from the driver side frame rail. To give you more clearance we mount the trac bar from the passenger side frame rail. On the axle side you use one of the rack mounting bolts.
